engine dies upon starting

Hi

Sorry it is in english, I do not speak nor write german.

I just bought a chrysler voyager and it is out of lpg so I cannot say if it works with LPG, when starting on petrol the problem starts :

Upon starting engine, engine runs erraticaly, smells gasoline at the exhaust, meaning lots of gasoline is used and not burned, then the alarm light from dashboard turns on and the alarm sound too meaning that something is wrong with the engine else (its a 1997 chrysler voyager), then once accelerator is released engine dies at idle. This goes until engine is totaly flooded with petrol and is not able to start anymore.

Checked Pin 26 on Prins VSI and it has 12 volts.


Once I disconnect the ground from the VSI system, engine is running normally on petrol.

Would this mean something is wrong with the injection module ???

 

Hi

thank's for the quick answer

The cable are coming directly out of the box, no connectors, it must be an old model.

Date on wire harness of VSI computer says 8/12/2005

 

Hi Rabemitgas

Same answer from PRINS netherland, they asked for the reference on the box et said the same thing IM should be the one, I wil change the IM, they even sent the pdf of modification of the wiring harness between the old model and the new model.

They answer very quickly.

Thank's for the help, I will post the result's when repaired.

PS : If someone has a very good address for VSI part, you can send by PM.

Regards
Invitro59